Casag1 f1000

Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens

Por um escritor misterioso
Last updated 10 novembro 2024
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
Hi all, I try to laser engrave text. The gcode is self-made. Everething looks fine in Luban and Elstam. I engrave from the controller to avoid wifi-problems. Still there are a few lines not printed. It looks they are done with 3%-5% power, like M3 starts too late or the laser is switched off to early. Any ideas? G90 ; absolute Koordinaten G21 ; metrisch M106 P0 S255 ; erster Lüfter auf 100% G0 F1000 ; Geschwindigkeit Leerfahrt G1 F400 ; Geschwindigkeit Arbeitsfahrt M3 P35 S89 ; Laser/Fr
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
TDDDD 333300044400444, PDF, Soldering
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
SNAPMAKER 2.0 LASER ETCHING PROBLEM FIXED
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
Snapmaker official response to print head gouging? - Snapmaker 2.0
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
March 2023 - Silicon Chip Online
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
Voltage stabilizers and transformers Botland - Robotic Shop
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
Snapmaker official response to print head gouging? - Snapmaker 2.0
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
February 2023 - Silicon Chip Online
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
TDDDD 333300044400444, PDF, Soldering
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
Laser engraving & cutting acrylic and Plexiglass with a laser CNC
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
Why is Laser Burning not finishing paths - Snapmaker 2.0
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
TDDDD 333300044400444, PDF, Soldering
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
Infill slicing fail? - Snapmaker 2.0 - Snapmaker: where creation
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
Voltage stabilizers and transformers Botland - Robotic Shop
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
TDDDD 333300044400444, PDF, Soldering
Laser dropouts failure - Snapmaker 2.0 - Snapmaker: where creation happens
TDDDD 333300044400444, PDF, Soldering
Recomendado para você
você pode gostar

© 2014-2024 vasevaults.com. All rights reserved.